ETM-5A 5KN Single Column
Digital Display Electronic Universal Testing Machine
1.Application
The single column series testing machine is designed and produced for the tensile, compression, peel,and bending tests of the rubbers, plastics, thin films or other materials.
And it is also used for the performance tests of the thin metal, wire, fiber, elastomer, foam materials.
ETM-5A digital display universal testing machine is used in light duty tensile, compression, and bending test applications for metallic, non-metallic, and composite materials. It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.
2. Test capability of machine and relevant Standard:
2.1ISO 6892-1:2016:Metallic materials — Tensile testing as universal test
2.2 ASTM E8 / E8M - 16a Standard Test Methods for Tension Testing of Metallic Materials
2.3 ISO 75001 Part 1: Tension/compression testing machines -- Calibration and verification of the force-measuring system
2.4 ASTM E4 - 16 Standard Practices for Force Verification of Testing Machines
3. Main Technical Parameters:
| Model | ETM-5A |
| Max.load | 5 kN |
| Load accuracy | class 1 |
| Load range | 1%-100% FS |
| Crosshead Travel | 1100mm (can be customized) |
| Effective Tensile Test Space | 900mm (can be customized) |
| Crossbeam travel speed/testing speed | 0.001~1000mm/min |
| Grips | Wedge tensile fixture,Compression fixture, peeling fixture |
| Power supply | AC 220V±10%,50Hz (can be customized) |
4. Main Unit Feature:
4.1 Rigid floor-standing frame loading structure with upper space for tensile and lower one for compression and bending test
4.2 Precise ball screws withstand the whole loading with long-life use and compact layout. G
4.3 Speed control system is set under the table and comprises the synchronous toothed belt and pulley for high-efficient transmission, which are featured with low noise and maintenance -free.
4.4 Fixed crossbeam as upper ones, and sits above the frame and with middle crossbeam as loading beam with smooth travel when testing. The high-accuracy sensor is installed below the crossbeam.
4.5 Load automatic withstanding,, stress, strain control, cycle control and self-programming. 4.6 Accurate load sensor for guarantee accurate and stable measure
4.7 Wide crossbeam travel speed from 0.05 ~ 500mm / min
4.8 Overload protection: as test force exceeds 2%-5% of the maximum test force of each file, overload protection, it will stop.
5. Components Supply list
High strength main unit----------------------------------------------------------------------1 set
High precision arc synchronous deceleration system--------------------------------1 suit
High precision ball screw--------------------------------------------------------------------2 pcs
Measurement control system--------------------------------------------------------------1 suit
High accuracy photoelectric encoder----------------------------------------------------1 pc
AC Servo Motor and Control system(Japan Panasonic optional)-----------------1 suit
High precision load sensor(Amercian Transcell optional)---------------------------1PC
Smart test software-------------------------------------------------------------------------1 suit
Tensile fixtures & compression plate------------------------------ -------- --------each 1set
Support table and cupboard ----------------------------------------- ------- ------------1 set
Lenovo computer----------------------------------------------------------------------------1 set
HP printer--------------------------------------------------------------------------------------1 set
Standard
ASTM B533 Peel Metal Coating Test Equipment
ASTM C794 Adhesion-in-Peel Elastomeric Joint Sealants Test Equipment
ASTM D1781 Climbing Drum Peel Test Equipment for Adhesives
ASTM D1876 T Peel Resistance Test Equipment for Adhesives
ASTM D2979 Tack Adhesive Testing Machine
ASTM D3167 Peel Resistance Adhesives Test Equipment
ASTM D3330 - Peel Adhesion Pressure Sensitive Adhesive Tapes
ASTM D429 - Rubber to Metal Adhesion Test Equipment
ASTM D5170 T Peel Strength of Hook and Loop Touch Velcro Fasteners
ASTM D6252 90 Degree Peel Adhesion Equipment for Pressure-Sensitive Label Stocks
ASTM D6862 90 Degree Peel Resistance Test Equipment for Adhesives
ASTM D903 180 degree Peel Strip Strength of Adhesive Bonds
ASTM F88 Seal Strength Testing Equipment for Flexible Barrier Materials
ISO 4578 Peel Resistance Testing Adhesives
Product Tags:
|
|
Single Column Digital Display Electromechanical Universal Testing Machine Model ETM -5A Images
|
